Introduction
Description of the board and all the necessary documents can be found here
USB Device and Host using Eval board
1) Download the library from here
2) Download the user manual for library. In the project folder read "readme" file on how to run the code.
For VCP example
Connect TX and RX pins: PC10 and PC11 (with a cable or a jumper). PC10 is UART4_TX and PC11 is UART4_RX. The micro-controller in the kit is in UFBGA176 package. In the board PC10 is in connector CN4 pin no 36 and PC11 is in connector CN4 pin no 35. A jumper can be used to simply connect them.
Jumper JP22 should be connected in position 1-2 (Rs232)
Description of the board and all the necessary documents can be found here
USB Device and Host using Eval board
1) Download the library from here
2) Download the user manual for library. In the project folder read "readme" file on how to run the code.
For VCP example
Connect TX and RX pins: PC10 and PC11 (with a cable or a jumper). PC10 is UART4_TX and PC11 is UART4_RX. The micro-controller in the kit is in UFBGA176 package. In the board PC10 is in connector CN4 pin no 36 and PC11 is in connector CN4 pin no 35. A jumper can be used to simply connect them.
Jumper JP22 should be connected in position 1-2 (Rs232)
No comments:
Post a Comment